Improper operation of the heat treatment furnace, various accidents are prone to occur, such as electric shock, burns, burns so on. The fuel gas controlled atmosphere are both flammable explosive gases. If improperly used, poisoning explosion accidents will occur. Therefore, it is necessary to strictly follow various regulations to operate use the heat treatment furnace to prevent the occurrence of personal equipment accidents. The safe operation of the heat treatment furnace includes the following:
1) Oven operation.
The oven is one of the key measures to avoid the cracking spalling of the masonry during the use of the heat treatment furnace to ensure its service life. It must be carried out according to the pre-established oven process curve to exclude the water in the masonry make the bricks Complete conversion.
2) Opening stopping operation.
Proper operation can ensure that no personal equipment accidents occur. For this reason, the operating rules of the heat treatment furnace must be strictly followed, the equipment should be used reasonably, preparations should be made before starting stopping the furnace, the process operation should be carried out step by step.
3) Thermal adjustment operation.
During the operation of the furnace, the fuel combustion electric energy utilization of the furnace should be closely observed, the thermal parameters such as heating, furnace temperature, furnace pressure should be adjusted in time to ensure that the equipment operates normally.
4) Routine maintenance.
It is the maintenance inspection operation of the heat treatment furnace to maintain its intact state maintain its working capacity during the use process, such as equipment spot inspection, periodic inspection, equipment lubrication maintenance.
Address: Kangmin Road, Economic Development Zone, Xinghua, Jiangsu, China
Mobile:0086 186 0523 8772